Nov 19, 2014 15:37:45 PST
Transaction ID: 92C01161AB8479118
210 Prospect Street
Middletown, MD 21769
AttachmentsNov 14 (5 days ago)
OK here is the order.
I have attached a couple pictures of the end table you built for me previously so you can match the new ones to it.
The only change I need is the backs need to be fully finished with the same paneling as the sides and with the same table top overhang.
The backs will be open to the room, so they needs to be fully finished, unlike the one on the photo.
I need two (2) of these new ones.
The dimensions of the unit to match the one I have should be approx.:
Unit base and table top = 16” wide x 26” depth
Unit body = 13.5” wide x 23.5” depth
Unit is 21” in height
Please use the same drawer/cabinet hardware.
In addition, I will also need another similar style end table, but need it to be able to house a subwoofer stereo speaker.
Kind of like a shell to go around the speaker since it sits on the floor next to the couch.
I have attached photos of the speaker that must be able to fit inside.
Instead of a door and drawer, it will need to have an open front and open back to accommodate the speaker and sufficient air flow.
The sides should be enclosed and finished with the same paneling as to match the other units.
If need be, the back of the unit can be partially enclosed, but there will need to be at least access to the control panel on the back of the speaker, as seen in the picture. The control panel is 9”W x 7”H and is 4.5” from the bottom of the speaker and 2.5” from the top and sides.
The speaker is 14”W x 14”H x 16”D
So, the open cabinet area where the speaker will sit should be approx. 16”W x 15.5” or 16”H
The height and depth of the end table should match the others = 21”H x 26” D
I have attached a crude drawing of what I am looking for to assist you.
Hopefully this makes sense?
Also — your previously used a specific stain but I am thinking that your standard dark stain might be OK.
Is your standard dark stain comparable to the stain color on the piece in these pictures?
I will also need the units coated with polyurethane.
Please confirm the receipt of this order and let me know if you have questions or need further clarification.
Thanks so much
3 units: 870.00 total delivered. Please allow 3-4 weeks for delivery from order date.